New
PIRANHA PII-88
Ironworkers
The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24" plate shear capacity.
| Tonnage | 88 T |
| Angle (L1) | 5" |
| Angle (L2) | 5" |
| Angle (T) | 0.375" |
| Power | 10 hp |
| Throat | 9" |
| Stroke | 7" |
| Dimensions | 38"W x 90"L x 72"H |
| Weight | 4700 (LBS) |
MAXIMUM SPECIFICATIONS (rated on mild steel)
Punching (88 Tons) 1-1/16” diameter through 1” plate
Throat Depth 9”
Bending (Optional) 24”, 36”, 48” w/4-way die block
Round Bar Shear 1/4” through 1-1/2”
Square Bar Shear 1/2” through 1”
Flat Bar Shear 8” x 3/4”, 12” x 5/8”, 24″ x 1/4″
Angle Shear 5” x 5” x 3/8”
Coping/Notching 2-3/4” x 4” x 1/4”
Motor 10 HP
Weight 4,700 Lbs.
STANDARD EQUIPMENT
Automatic Hold Down
Coupling Wrench
Punch Holder, Stripper, & Die Block
5 Punch & Die Sets 9/16” through 1-1/16”
Chip Bucket
Set of Angle Knives
Extra Filter Element
Set 1” Round Bar Knives
Set of 20-5/8” Plate Shear Knives
Instruction/Parts Book/Video Link
Set of Coper Knives