New
SCOTCHMAN PORTA FAB 45 SINGLE OPERATOR
Ironworkers
The Scotchman Porta Fab 45 hydraulic ironworker is the perfect choice for the small fabricator! This portable ironworker is designed for in-plant or on-the-job operation and uses 110-volt power for added convenience. Featuring a 45-ton punching capacity, the Porta-Fab 45 can punch 1-1/8″ through 1/2″ material and comes standard with a 3-in-1 combination tool consisting of a 3/8″ x 6″ flat bar shear, 3/4″ rod shear, and a 3″ x 3″ x 5/16″ angle shear. The Porta Fab 45 hydraulic ironworker also accepts many other optional Scotchman tooling components including press brakes, pipe notchers, rectangular notchers, and picket tool attachments. The American-made Porta Fab 45 utilizes a hydraulic system with electric valve and remote foot pedal for ease of use, an adjustable electric stroke control with scale, and is backed by Scotchman’s industry leading 3-Year Warranty.
| Tonnage | 45 T |
| Angle (L1) | 3" |
| Angle (L2) | 3" |
| Angle (T) | 0.3125" |
| Power | 2 hp |
| Throat | 4.25" |
| Weight | 724 (LBS) |
Punching Capacity
45 Ton (41 mt)
1-1/8" in 1/2" (28 mm in 12 mm)
Special Tooling
2-1/4" Max. Dia. 57 mm Max. Dia.
Throat Depth
4-1/4" 108 mm
Flat Bar Shear
6" Length 152 mm
1/2" x 4" 12 mm x 102 mm
3/8" x 6" 10 mm x 152 mm
Angle Shear 90 degree
3" x 3" x 5/16" 76 mm x 76 mm x 8 mm
Angle Shear 45 degree
2" x 2" x 1/4" 51 mm x 51 mm x 6 mm
Round Rod Shear
3/4" 19 mm
Brake 8"
25 Ton 23 mt
Brake 12"
20 Ton 18 mt
Open End Brake
Max. 1/4" x 3"
[Flat or Angle Iron] 6 mm x 76 mm
Pipe Notcher Schedule 40
3/4", 1", 1-1/4", 1-1/2", 2"
Rectangle Notcher
2" x 1-3/4" x 1/4" 51 mm x 44 mm x 6 mm
90 degree V-Notcher
6" x 6" x 1/8" 152 mm x 152 mm x 3 mm
Rod Shear
Round (max.)
5 Cavity - 1/4" to 1" 6 mm to 25 mm
Square (max.)
1 Cavity - 1/4" to 3/4" 6 mm to 19 mm
Unistrut Shear
Samples Required
Square Tube Shear
1/2" to 1" 12 gauge
12 to 25 mm 0.105" / 2.7 mm
Picket Tool
1/2", 3/4" & 1" 12 mm, 19 mm, 25 mm
16 gauge 0.06" / 1.5 mm
Weld Coupon Bender (max.)
2" wide x 3/8" 51 mm x 10 mm
Strokes per minute
in light material
10 spm
[Punch Station] 1/4" Stroke
Strokes per minute
in heavy material
4 spm
[Punch Station] 3/4" Stroke
Hydraulics
2,500 psi 172 bar
Motor Standard
2 hp 110v
Motor Optional
2 hp 220v,
1 ph 1.49kW
Dimensions
L: 38-1/4" L: 97 cm
W: 20" W: 51 cm
H: 39-1/4" H: 100 cm
Shipping Weight (may vary)
710 lbs. 322 kg